項目名稱：中廣核德令哈50MW光熱發電項目（以下簡稱“項目”）

Project Name：  CGN-DELINGHA 50MW SOLAR THERMAL POWER GENERATION PROJECT (hereinafter called “Project”)

 

國際招標名稱：導熱油泵

IFB Name:HTF Pumps

 

招標編號：0706-15400002J017

IFB No.：0706-15400002J017

 

招標機構：中國技術進出口總公司

Tendering Agent：China National Technical Import and Export Corporation

 

發布日期：2015-02-25

Date：February 25th, 2015

 

中國技術進出口總公司（以下簡稱“招標代理機構”）受招標人中廣核太陽能德令哈有限公司委托，就本項目采購進行國際公開招標。合格的具有獨立法人資格以及滿足本招標公告中關于投標人資格要求的投標人均可報名參加本項目的投標。

China National Technical Import and Export Corporation (CNTIC), hereinafter called as the “Tendering Agency”, for and on behalf of CGN Delingha Solar Energy Co., Ltd (hereafter called the “Tendering Party”), invites sealed bids from eligible suppliers home and abroad for the supply of the following service by way of International Competitive Bidding.

 

Project brief：

中廣核德令哈50MW光熱發電項目廠址位于青海省德令哈市西出口太陽能產業園區內，距離德令哈市約7km。本項目占地面積約2.5km2，海拔約3000m，規劃裝機容量100MW，其中本期建設50MW。

CGN-Delingha 50MW Solar Thermal Power Generation Project is located in Delingha Solar Industrial Park in Qinghai province, about 7 km from Delingha city. It covers about 2.5km2. And the altitude is about 3000m. The planning installed capacity is 100MW. This project is the first phase with 50MW.

本項目采用槽式導熱油太陽能熱發電技術，建設190個槽式集熱器標準回路，設置一套雙罐二元硝酸鹽儲熱系統（儲熱容量滿足汽輪發電機組滿負荷7.5小時發電需要），并設計、建設一套55MW的中溫、高壓一次再熱的汽輪發電機組。

This project will adopt the parabolic solar energy power generation technology. There will be 190 parabolic through collector (PTC) loops, a molten salt heat storage system (heat storage can meet the needs of wind power at full load for 7.5 hours) and a 55 MW high-pressure intermediate-temperature and single reheat.

 

Bidding Scope & Construction Period：

2.1招標范圍：

Bidding Scope：

本次招標為德令哈50MW光熱發電項目采購導熱油泵，具體內容包含但不限于以下方面：

1) 導熱油泵及配套變頻電機；

2) 備品備件、專用工具等；

3) 油泵變頻器不包含在本次招標范圍內。

The main contents are as follows:

1) HTF Pumps and supporting inverter motor ;

2) Spare parts, special tools, etc;

3) Oil pump frequency converter is not included in the scope of this project.

 

2.2項目工期：中標通知書后12個月貨到項目現場。

Construction Period：12 months after letter of acceptance.

詳見技術規范書。

According to the Technical Specification.

 

Bidder’s Qualifications:

1)  投標人必須是在中華人民共和國境內境外注冊的獨立法人，未被處于責令停業、投標資格被取消、或者財產被接管、凍結和破產狀態；

The bidder shall legally register in China or foreign countries, not in a state of proscribed, disqualify the bid qualification, property has distrained, frozen or bankrupt;

2)  投標人應提供近三年經審計的財務報告以證明其具有良好的現金流和財務狀況；

The bidder shall have good financial status and reputation and provide the audited Financial Statements from 2011 to 2013;

3)  投標人應具有2個項目且總數量不少于6臺同類（高溫導熱油介質）產品的應用業績，上述項目至少已運行2年；其設計溫度不低于400℃，正常運行溫度不低于280℃，單機功率不小于500KW；

The bidder shall have more than two records and not less than six sets in field of the same type of machinery (HTF medium temperature). The project shall have been put into commercial operation for more than two years. The design temperature is not lower than 400 ℃, the normal operating temperature is not lower than 280 ℃, single power is not less than 500KW;

4)  本次招標不接受聯合體投標；本次招標不接受代理商投標.

Consortium bid and agents bid will lead to the rejection of bid.

*以上要求投標人必須同時滿足，所提供的所有資質文件必須真實，且與投標人主體一致，如果需要年檢的，請確保提供的文件復印件已年檢合格，否則在評標時做廢標處理。

* The bidder must meet all the qualifications, and provide real and effective evidence, and supply the certificate file yearly checked, if not will lead to the rejection of bid.